{"code":0,"info":[{"model":"mt3000","version":"4.11.1","stage":"TESTING","release_time":"2026-09-29 19:40:06","release_note":"<h1>V4.11.1</h1>\n<h2>Overview</h2>\n<p>This version fixes some known bugs.</p>\n<h2>Bug Fixes</h2>\n<ul>\n<li><strong>HTTPS</strong>: Fixed an issue where the device’s web admin interface could not be accessed over HTTPS (port 443) using a DDNS domain name or Tailscale MagicDNS.</li>\n</ul>\n","release_note_cn":"<h1>V4.11.1</h1>\n<h2>版本概述</h2>\n<p>此版本修复了一些已知问题。</p>\n<h2>Bug 修复</h2>\n<ul>\n<li><strong>HTTPS</strong>: 修复通过 Tailscale MagicDNS 无法使用 HTTPS（443 端口）访问设备 Web 管理界面的问题。</li>\n</ul>\n","partner":null,"download":[{"compileTime":"2026-09-29 19:05:57","link":"https://fw.gl-inet.com/firmware/mt3000/testing/mt3000-4.11.1_beta1-1148-0929-1790679957.tar","name":"mt3000-4.11.1_beta1-1148-0929-1790679957.tar","sha256":"caf8d1f1a73f71e71dc7ca0012a30ec38c2750841b0cf84cc948760f97667a44","size":80405555,"compile_time":1790679957,"last_modified_time":1790679957},{"compileTime":"2026-09-29 19:05:57","link":"https://fw.gl-inet.com/firmware/mt3000/testing/mt3000-4.11.1_beta1-1148-0929-1790679957.img","name":"mt3000-4.11.1_beta1-1148-0929-1790679957.img","sha256":"5e7dceec3bfd431fb170e1484c800c9e87915206469d56f8bb61dd3b01f8e8eb","size":84017152,"compile_time":1790679957,"last_modified_time":1790679957}]},{"model":"mt3000","version":"4.11.0","stage":"RELEASE","release_time":"2026-09-28 19:28:14","release_note":"<h1>V4.11.0</h1>\n<h2>Overview</h2>\n<p>This release introduces new Mesh, GL.iNet Account, network monitoring, security, and VLAN features, alongside major enhancements to DNS, VPN, SQM, QoS, and traffic statistics.</p>\n<h2>New Features</h2>\n<ul>\n<li><strong>Network Quality</strong>: Adds GL.iNet Score, latency/jitter/packet loss metrics, real-time rate display, active speed tests, and Bufferbloat grading.</li>\n<li><strong>Security Scan</strong>: Scans Wi-Fi safety, WAN exposure, app security, and firmware status; provides a security score, risk list, and quick fixes.</li>\n<li><strong>VLAN</strong>: Adds native VLAN support based on IEEE 802.1Q for logical network segmentation, enhancing isolation and resource management efficiency.</li>\n<li><strong>UPnP</strong>: Adds global UPnP controls and supports toggle switches, automatic mapping lists, and manual deletion.</li>\n<li><strong>Mesh</strong>: Adds EasyMesh-compliant networking using local Mesh Nodes.</li>\n<li><strong>GL.iNet Account</strong>: Introduces a centralized profile page for viewing and managing GL.iNet account services.</li>\n</ul>\n<h2>Optimizations &amp; Enhancements</h2>\n<ul>\n<li><strong>DNS</strong>: Introduces a centralized DNS dashboard for WAN, VPN, Manual, and Encrypted DNS with clear active-status indicators.</li>\n<li><strong>VPN</strong>: Expands VPN capabilities with MFA support for Surfshark and Windscribe, and integrates X-VPN with AmneziaWG 2.0 obfuscation support.</li>\n<li><strong>SQM</strong>: Improves multi-WAN, guest network, IoT, and VLAN handling; rules now auto-sync queues and AutoRate instances upon interface changes.</li>\n<li><strong>QoS</strong>: Unifies configuration entry, adds mutually exclusive policy modes, and optimizes UDP small-packet prioritization for Gaming mode.</li>\n<li><strong>Data Statistics</strong>: Upgrades traffic visibility with client filtering, bar charts, and pie charts.</li>\n<li><strong>GoodPAS</strong>: Renames AstroWarp to GoodPAS.</li>\n<li><strong>GoodCloud</strong>: Streamlines the account binding process and adds an option to clear cloud account data during a factory reset.</li>\n<li><strong>VPN</strong>: Adds IP address and DNS conflict detection for cascaded VPN configurations.</li>\n</ul>\n","release_note_cn":"<h1>V4.11.0</h1>\n<h2>版本概述</h2>\n<p>本版本引入了全新的 Mesh、GL.iNet 账户、网络监控、安全及 VLAN 功能，并对 DNS、SQM、QoS 和流量统计进行了重大增强。</p>\n<h2>新增功能</h2>\n<ul>\n<li><strong>网络质量监控</strong>：新增 GL.iNet 评分系统，提供延迟、抖动、丢包率等核心指标，支持实时速率显示、主动测速及 Bufferbloat（缓冲区膨胀）分级。</li>\n<li><strong>安全扫描</strong>：全面扫描 Wi-Fi 安全、WAN 口暴露、应用安全及固件更新状态；提供安全评分、风险清单及一键修复功能。</li>\n<li><strong>VLAN</strong>：新增基于 IEEE 802.1Q 标准的原生 VLAN 支持，实现逻辑网络隔离，提升网络隔离与资源管理效率。</li>\n<li><strong>UPnP</strong>：新增全局 UPnP 控制，支持开关切换、自动映射列表以及手动删除。</li>\n<li><strong>Mesh</strong>：新增符合 EasyMesh 标准的组网功能，支持使用本地 Mesh 节点组网。</li>\n<li><strong>GL.iNet 账户</strong>：新增集中式个人资料页面，可统一查看和管理 GL.iNet 账户服务。</li>\n</ul>\n<h2>优化与增强</h2>\n<ul>\n<li><strong>DNS</strong>：引入集中式 DNS 控制面板，统一配置 WAN、手动及加密 DNS，并清晰指示当前生效的 DNS 状态。</li>\n<li><strong>SQM</strong>：优化多 WAN、访客网络、IoT 和 VLAN 场景下的表现；当接口发生变化时，规则会自动同步队列和 AutoRate 实例。</li>\n<li><strong>QoS</strong>：统一配置入口，引入互斥策略模式，并针对游戏模式优化了 UDP 小包的优先级排序。</li>\n<li><strong>流量统计</strong>：升级流量可视化体验，支持客户端筛选，并提供柱状图和饼图分析。</li>\n<li><strong>GoodCloud</strong>：简化账户绑定流程，并新增在恢复出厂设置时清除云账户数据的选项。</li>\n</ul>\n","partner":null,"download":[{"compileTime":"2026-09-24 16:25:40","link":"https://fw.gl-inet.com/firmware/mt3000/release/mt3000-4.11.0_release3-1147-0924-1790238340.tar","name":"mt3000-4.11.0_release3-1147-0924-1790238340.tar","sha256":"7f0cf627d6ad778c11ae0fefe668ac3c6eedd3164f6c215281649b2656afcc0e","size":80408765,"compile_time":1790238340,"last_modified_time":1790238340},{"compileTime":"2026-09-24 16:25:40","link":"https://fw.gl-inet.com/firmware/mt3000/release/mt3000-4.11.0_release3-1147-0924-1790238340.img","name":"mt3000-4.11.0_release3-1147-0924-1790238340.img","sha256":"377f918aba31263b61165a355148c22d0b951a9944ee19eb24f20547644563d1","size":84017152,"compile_time":1790238340,"last_modified_time":1790238340}]},{"model":"mt3000","version":"4.9.0","stage":"RELEASE","release_time":"2026-09-04 09:49:07","release_note":"<h1>V4.9.0</h1>\n<h2>Cautions</h2>\n<ul>\n<li><strong>Parental Controls</strong>: Due to a comprehensive feature redesign, existing configurations will not be preserved during this upgrade. Please back up your settings and reconfigure them after the update.</li>\n<li><strong>VPN Failover</strong>: With the introduction of multi-node selection and intra-tunnel failover, the legacy inter-tunnel failover feature has been removed. Upgrading with configuration retention will enable the Kill Switch by default across all tunnels. Please back up your settings prior to upgrading.</li>\n</ul>\n<h2>Overview</h2>\n<p>This release introduces DPI and SQM for intelligent traffic management and QoS, overhauls the Wireless and VPN interfaces, and expands DNS encryption options alongside multiple service integrations.</p>\n<h2>New Features</h2>\n<ul>\n<li><strong>DPI (Deep Packet Inspection)</strong>: Delivers traffic statistics, content filtering, and intelligent QoS.</li>\n<li><strong>SQM (Smart Queue Management)</strong>: Intelligently optimizes network queues to reduce latency and jitter.</li>\n<li><strong>VPN Multi-Node Selection</strong>: Supports multiple node selection per tunnel with automatic failover on node failure.</li>\n<li><strong>VPN Service Providers</strong>: Adds support for PureVPN and Windscribe under WireGuard protocol.</li>\n<li><strong>WireGuard Server Profile Toggle</strong>: Enables or disables specific profile configurations.</li>\n<li><strong>IoT Network Isolation</strong>: Creates dedicated networks for IoT devices.</li>\n<li><strong>Cellular Profile Management</strong>: Supports cellular profile management and online APN database updates.</li>\n<li><strong>ACL (Access Control List)</strong>: Controls network traffic based on protocol, source/destination IP, and port rules.</li>\n<li><strong>Tailscale Exit Node</strong>: Supports running the router as a Tailscale exit node with IP masquerade.</li>\n<li><strong>Firmware Upgrade Control</strong>: Adds option to disable automatic detection and cancel in-progress downloads.</li>\n<li><strong>Offline Client Cleanup</strong>: Automatically removes offline clients from the Client page.</li>\n<li><strong>Address Reservation Hostname</strong>: Supports custom hostname configuration for address reservations.</li>\n</ul>\n<h2>Optimizations &amp; Enhancements</h2>\n<h3>VPN &amp; Security Protocols</h3>\n<ul>\n<li><strong>VPN Core</strong>: Overhauls core interaction flow and visual design for a more intuitive interface.</li>\n<li><strong>AmneziaWG</strong>: Introduces support for AmneziaWG 2.0 obfuscation protocol.</li>\n</ul>\n<h3>Core UI &amp; UX Redesign</h3>\n<ul>\n<li><strong>Wireless UI</strong>: Redesigns the wireless interface with streamlined layout and consistent visual styling for improved simplicity.</li>\n<li><strong>Cellular Interface</strong>: Integrates cellular features and improves overall user experience.</li>\n<li><strong>VPN Client</strong>: Supports batch selection and deletion of VPN configurations.</li>\n<li><strong>Parental Control</strong>: Streamlines the setup process with enhanced device management, internet time control, and content filtering.</li>\n</ul>\n<h3>System &amp; Network Services</h3>\n<ul>\n<li><strong>Encrypted DNS</strong>: Expands encryption method support to DoH, DoT, and DoQ, adds more DNS provider options, and enables manual encrypted DNS server configuration.</li>\n<li><strong>Tailscale</strong>: Upgrades to version 1.92.5.</li>\n<li><strong>Port Forwarding</strong>: Automatically performs one-to-one mapping for external and internal port ranges.</li>\n<li><strong>Multi-WAN IPv6</strong>: Activates IPv6 connection status tracking automatically when IPv6 is enabled.</li>\n</ul>\n<h2>Bug Fixes &amp; Security</h2>\n<ul>\n<li><strong>Security Patches</strong>: Updates dnsmasq to v2.92 to incorporate upstream security fixes; applies the CVE-2026-47703 patch for AdGuard Home.</li>\n</ul>\n","release_note_cn":"<h1>V4.9.0</h1>\n<h2>注意事项</h2>\n<ul>\n<li><strong>家长控制</strong>：由于家长控制功能进行了彻底重构，升级后将无法保留现有配置。升级前请务必备份设置，并在更新后重新配置。</li>\n</ul>\n<h2>版本概述</h2>\n<p>本版本引入 DPI 与 QM 实现智能流量管理与 QoS，重构无线界面，并扩展 DNS 加密选项及多项服务集成。</p>\n<h2>新增功能</h2>\n<ul>\n<li><strong>DPI（深度包检测）</strong>：提供流量统计、内容过滤及智能 QoS 能力。</li>\n<li><strong>SQM（智能队列管理）</strong>：智能优化网络队列，降低延迟与抖动。</li>\n<li><strong>IoT 网络隔离</strong>：支持为 IoT 设备创建独立专用网络。</li>\n<li><strong>蜂窝配置管理</strong>：支持蜂窝 Profile 管理及在线 APN 数据库更新。</li>\n<li><strong>ACL（访问控制列表）</strong>：基于协议、源/目的 IP、端口号等规则控制网络流量。</li>\n<li><strong>Tailscale 出口节点</strong>：支持将路由器作为 Tailscale 出口节点运行，并增加 IP 伪装功能。</li>\n<li><strong>固件升级控制</strong>：新增关闭自动检测及取消进行中固件下载的选项。</li>\n<li><strong>离线客户端清理</strong>：Client 页面新增自动清理离线客户端功能。</li>\n<li><strong>地址预留主机名</strong>：支持为地址预留条目设置自定义主机名。</li>\n</ul>\n<h2>优化与增强</h2>\n<h3>核心 UI 与交互重构</h3>\n<ul>\n<li><strong>无线界面</strong>：重构无线界面，简化布局并统一视觉风格，提升简洁性与易用性。</li>\n<li><strong>蜂窝界面</strong>：整合蜂窝功能，优化用户操作体验。</li>\n<li><strong>家长控制</strong>：简化配置流程，增强设备管理、上网时段控制及内容过滤能力。</li>\n</ul>\n<h3>系统与网络服务</h3>\n<ul>\n<li><strong>加密 DNS</strong>：扩展加密方式至 DoH、DoT 及 DoQ，增加更多 DNS 服务商选项，并支持手动配置加密 DNS 服务器。</li>\n<li><strong>Tailscale 优化</strong>：升级 Tailscale 至 v1.92.5。</li>\n<li><strong>端口转发</strong>：自动对外部与内部端口范围进行一对一映射。</li>\n<li><strong>多WAN IPv6</strong>：启用 IPv6 时自动激活多 WAN 的 IPv6 连接状态跟踪。</li>\n</ul>\n<h2>Bug 修复与安全更新</h2>\n<ul>\n<li><strong>安全补丁</strong>：更新 dnsmasq 组件至 v2.92 以修复上游安全漏洞。</li>\n</ul>\n","partner":null,"download":[{"compileTime":"2026-09-02 10:38:06","link":"https://fw.gl-inet.com/firmware/mt3000/release/mt3000-4.9.0_release5-1094-0902-1788316686.tar","name":"mt3000-4.9.0_release5-1094-0902-1788316686.tar","sha256":"0e6dcecefb348d6de1535064789d98fdc796555c64c0d5b3c140507c2634a684","size":73242650,"compile_time":1788316686,"last_modified_time":1788316686},{"compileTime":"2026-09-02 10:38:06","link":"https://fw.gl-inet.com/firmware/mt3000/release/mt3000-4.9.0_release5-1094-0902-1788316686.img","name":"mt3000-4.9.0_release5-1094-0902-1788316686.img","sha256":"ebd8ebb7a71e41e5c18ff8c9badb84db93f26f0ecf0dc22584a08b41d531612d","size":76677120,"compile_time":1788316686,"last_modified_time":1788316686}]},{"model":"mt3000","version":"4.8.1","stage":"RELEASE","release_time":"2025-08-19 22:39:41","release_note":"<h1>V4.8.1</h1>\n<h2>Overview</h2>\n<p>This version mainly fixed some known bugs.</p>\n<h2>Bug Fixes</h2>\n<ul>\n<li>Improved issues related to Direct Routing applications</li>\n<li>Fixed the issue where DNS requests did not go through the VPN tunnel when AdGuard Home's upstream DNS server was customized to NextDNS's HTTP/3 and QUIC protocols.</li>\n<li>Fixed the issue where parental controls might not take effect when the VPN client was enabled.</li>\n</ul>\n","release_note_cn":"<h1>V4.8.1</h1>\n<h2>概述</h2>\n<p>此版本主要修复了一些已知缺陷。</p>\n","partner":null,"download":[{"compileTime":"2025-08-19 22:39:41","link":"https://fw.gl-inet.com/firmware/mt3000/release/mt3000-4.8.1-0819-1755615825.tar","name":"mt3000-4.8.1-0819-1755615825.tar","sha256":"ee038ee0f399c1454cc660dd47811b44697f5304e0f61af145c7dca6817d0e5c","size":60929070,"compile_time":1755614381,"last_modified_time":1755614381},{"compileTime":"2025-08-19 22:39:41","link":"https://fw.gl-inet.com/firmware/mt3000/release/mt3000-4.8.1-0819-1755615825.img","name":"mt3000-4.8.1-0819-1755615825.img","sha256":"fc2938dcd26cf8e576a99a47da9ad1e9bdce6e649b82e79acb23535affebc6cb","size":63963136,"compile_time":1755614381,"last_modified_time":1755614381}]},{"model":"mt3000","version":"4.8.0","stage":"RELEASE","release_time":"2025-07-23 20:47:20","release_note":"<h1>V4.8.0</h1>\n<h2>Overview</h2>\n<p>This version introduces several new features and enhancements that improve the interface interaction for the overall user experience.</p>\n<h2>New Features</h2>\n<ul>\n<li>Added VPN multi-instance, allowing support for enabling multiple VPN clients at the same time.</li>\n<li>Added VPN composite policy, allowing traffic diversion based on multiple criteria, including source interface, source MAC address, and destination domain/IP.</li>\n<li>Added an option to enable or disable VPN internet access on the Clients page, which is effective only when the VPN policy is based on MAC.</li>\n<li>Added the isolation feature between the Guest Network and the Upstream network.</li>\n<li>Added support for HTTPS in RTTY.</li>\n<li>Added a one-click option to send logs to technical support.</li>\n<li>Added support for IPv6 in VPN.</li>\n</ul>\n<h2>Optimization</h2>\n<ul>\n<li>Refactored the Cellular function for improved performance and user interface, supporting more parameter configurations and status displays.</li>\n<li>Redesigned the UI style, improved the Web Admin Panel topology, and introduced new controls to support the presentation of complex services.</li>\n<li>Optimized toggle switch functionality to support Repeater, Wi-Fi and LED light control.</li>\n<li>Optimized the guidance of VPN functionality to simplify usage.</li>\n<li>Optimized VPN configuration to support IPv6.</li>\n<li>Optimized the export of client configuration files for the VPN Server, allowing users to manually enter the server address in the configuration file.</li>\n<li>Optimized the Clients page, supporting quick setting of reserved IP addresses.</li>\n<li>Optimized the Log display to support filtering by Log level, module, and keywords, as well as exporting more debugging information.</li>\n<li>Optimized the GoodCloud platform's device binding functionality.</li>\n<li>Optimized the display of VPN Server page status information.</li>\n<li>Optimized the Repeater auto-switching logic.</li>\n<li>Improved the ease of use of the AstroWarp functionality.</li>\n<li>Upgraded OpenVPN to version 2.6.12.</li>\n<li>Upgraded Dnscrypt-proxy to version 2.1.5.</li>\n<li>Upgraded Stubby to version 0.4.3.</li>\n<li>Upgraded Zerotier to version 1.14.1.</li>\n</ul>\n","release_note_cn":"<h1>V4.8.0</h1>\n<h2>概述</h2>\n<p>此版本主要新增了一些功能和优化了界面交互，从而提升用户体验。</p>\n<h2>新功能</h2>\n<ul>\n<li>新增 Guest 网络与上级网络隔离功能。</li>\n<li>新增 RTTY 对 HTTPS 的支持。</li>\n<li>新增一键发送 Log 反馈给技术支持。</li>\n</ul>\n<h2>优化</h2>\n<ul>\n<li>重构 Cellular 功能，优化性能和交互设计，支持更多的参数配置和状态显示。</li>\n<li>重构界面 UI 样式，改进网络页拓扑，引入新控件以支持复杂业务的呈现。</li>\n<li>优化拨动开关，支持 Repeater、Wi-Fi 及 LED 灯控制。</li>\n<li>优化 Clients 页面，支持快速设置预留 IP 地址。</li>\n<li>优化 Log 功能，支持通过 Log 等级、模块、关键词筛选，以及支持导出更多的调试信息。</li>\n<li>优化 GoodCloud 云平台设备绑定功能。</li>\n<li>优化 Repeater 自动切换逻辑。</li>\n<li>升级 Dnscrypt-proxy 到 2.1.5。</li>\n<li>升级 Stubby 到 0.4.3。</li>\n<li>升级 Zerotier 到 1.14.1。</li>\n</ul>\n","partner":null,"download":[{"compileTime":"2025-07-23 20:47:20","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.8.0-0723-1753276204.tar","name":"openwrt-mt3000-4.8.0-0723-1753276204.tar","sha256":"0c2a582c26ae1d7b3a4c5e117426179a12eff77c335de998c7cf9bb617bf30d1","size":60941925,"compile_time":1753274840,"last_modified_time":1753274840},{"compileTime":"2025-07-23 20:47:20","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.8.0-0723-1753276204.img","name":"openwrt-mt3000-4.8.0-0723-1753276204.img","sha256":"4ced9544682d44211c0cbdd179895def31f90533958506ee9004fa9cbd4373bc","size":63963136,"compile_time":1753274840,"last_modified_time":1753274840}]},{"model":"mt3000","version":"4.7.4","stage":"RELEASE","release_time":"2025-03-28 09:53:50","release_note":"<h1>V4.7.4</h1>\n<h2>Overview</h2>\n<p>This version fixes some security vulnerabilities and other bugs.</p>\n<h2>Bug Fixes</h2>\n<ul>\n<li>Fixed the issue where the failed VPN policy subscription URL request would display an unknown error.</li>\n<li>Fixed the issue where turning off 'Override DNS Settings of All Clients' would not take effect after enabling AdGuard Home or VPN Client.</li>\n<li>Fixed the issue where DDNS testing failed to display the WAN address of Ethernet 2.</li>\n<li>Fixed an issue where no error message was displayed when entering an incorrect old password, while changing the administrator password.</li>\n<li>Fixed the issue where manually adding a WireGuard Client configuration would incorrectly prompt the error message.</li>\n<li>Fixed the issue where modifying the administrator password did not log out the current LuCI session.</li>\n<li>Fixed the issue where the AzireVPN login password containing special characters, such as '$', would incorrectly trigger an 'invalid login info' error message.</li>\n<li>Fixed the issue where the client name containing a comma prevented address retrieval.</li>\n<li>Fixed the issue where the GL.iNet APP could not customize client types.</li>\n<li>Fixed the issue where network storage could not share directories containing special characters.</li>\n<li>Fixed the issue where Wi-Fi 5G downlink rate decreased after the client was connected for a period of time.</li>\n<li>Fixed the issue where turning on the 'Camouflage' mode would still fail to pass the portal authentication.</li>\n<li>Fixed the issue where switching from DHCPv6 to PPPoEv6 prevented the downstream devices from accessing the internet.</li>\n<li>Fixed the issue where switching to WDS mode, after enabling AP isolation, would cause address acquisition failure.</li>\n<li>Fixed the issue where the WireGuard Client name field would close automatically when tapping outside the input area.</li>\n</ul>\n","release_note_cn":"<h1>V4.7.4</h1>\n<h2>概述</h2>\n<p>此版本主要修复了一些安全漏洞和已知缺陷。</p>\n<h2>同步更新的型号</h2>\n<p>Beryl AX (GL-MT3000), Brume 2 (GL-MT2500), Flint 2 (GL-MT6000)。</p>\n<h2>BUG 修复</h2>\n<ul>\n<li>修复了 VPN 策略订阅的 URL 请求失败时，页面会报未知错误的问题。</li>\n<li>修复了开启 AdGuard Home 或 vpnclient 后，关闭 'Override DNS Settings of All Clients' 不生效的问题。</li>\n<li>修复了 DDNS 测试结果没有显示以太网2的广域地址的问题。</li>\n<li>修复了修改管理员密码输入错误的旧密码时，没有错误提示的问题。</li>\n<li>修复了手动添加 WireGuard Client 配置时，会错误提示参数不合法的问题。</li>\n<li>修复了修改管理员密码，已登录的 LuCI 页面不会退出登录的问题。</li>\n<li>修复了 AzireVPN 密码中有 '$' 等特殊符号时，登录会提示无效的登录信息的问题。</li>\n<li>修复了客户端名字含有逗号导致无法获取地址的问题。</li>\n<li>修复了在 APP 无法自定义设置客户端类型的问题。</li>\n<li>修复了网络存储无法共享存在特殊字符的目录的问题。</li>\n<li>修复了客户端连接一段时间后 Wi-Fi 5G 下行速率降低的问题。</li>\n<li>修复了开启伪装模式后，仍然无法通过上级 portal 认证的问题。</li>\n<li>修复了 DHCPv6 切换到 PPPoEv6 后，下级无法上网的问题。</li>\n<li>修复了开启 AP 隔离后，切换到 WDS 模式无法获取地址的问题。</li>\n<li>修复了 WireGuard Client 编辑名字时在触碰到编辑区域以外时自动收起的问题。</li>\n</ul>\n","partner":null,"download":[{"compileTime":"2025-03-28 09:53:50","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.7.4-0328-1743128536.tar","name":"openwrt-mt3000-4.7.4-0328-1743128536.tar","sha256":"8e27eb7ca690a54bbbb208a2945d12f2b60082325b7d3adb970c717bddbcff25","size":57819053,"compile_time":1743126830,"last_modified_time":1743126830},{"compileTime":"2025-03-28 09:53:50","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.7.4-0328-1743128536.img","name":"openwrt-mt3000-4.7.4-0328-1743128536.img","sha256":"a3aafc265115d05dfa558bfc4cfed36f8c433ddfc80eb7e46d7e206bb3b5a263","size":60686336,"compile_time":1743126830,"last_modified_time":1743126830}]},{"model":"mt3000","version":"4.7.0","stage":"RELEASE","release_time":"2024-12-05 09:28:13","release_note":"<h1>V4.7.0</h1>\n<h2>Overview</h2>\n<p>This version introduces several new features and enhancements that improve the interface interaction for overall user experience.</p>\n<h2>Synchronize Updated Models</h2>\n<p>Beryl AX (GL-MT3000), Brume 2 (GL-MT2500), Flint 2 (GL-MT6000).</p>\n<h2>New Features</h2>\n<ul>\n<li>Added device initialization wizard, including settings for administrator and WiFi password, networking connection, VPN and other core functionalities.</li>\n<li>Added AstroWarp mode (Beta), allowing you to create your own network using aggregated connections and cloud gateways for a high-speed, stable network experience.</li>\n<li>Added cloud account login functionality, supporting device binding to the cloud from the firmware web page.</li>\n<li>Added domain name list subscription feature, supporting VPN policies and parental control through URL subscriptions for online domain name or IP list.</li>\n<li>Added support for Control D DNS.</li>\n<li>Added AP Isolation function.</li>\n<li>Added Luci Access Restriction function.</li>\n<li>Added USB port protocol conversion function, allowing downgrading to use USB 2.0.</li>\n<li>Added Network Port Management page, supporting scheduled and reboot of automatic updates for Ethernet MAC, WAN/LAN port switching, and displaying network port negotiation rates.</li>\n<li>Added support for NordVPN, PIA, Surfshark, Hideme, IPVanish WireGuard VPN services, along with AzireVPN registration functionality.</li>\n</ul>\n<h2>Optimization</h2>\n<ul>\n<li>Optimized the process for manually adding the WireGuard client configuration files and supporting automatic key generation.</li>\n<li>Optimized the process of configuring vendor profiles for VPN clients.</li>\n<li>Optimized repeater random MAC settings, supporting scheduled and reboot of automatic updates for repeater MAC.</li>\n<li>Optimized the detection process for multi-WAN load network status.</li>\n<li>Optimized OpenVPN Client functionality, allowing modification of configuration file names.</li>\n<li>Optimized the page names in the web management panel so that the router's hostname is displayed in the browser tab.</li>\n<li>Optimized the design of interface error messages and interactive elements like input dropdown lists.</li>\n<li>Upgraded AdGuard Home to version 0.107.52.</li>\n<li>Upgraded Tor to version 0.4.8.9.</li>\n</ul>\n","release_note_cn":"","partner":null,"download":[{"compileTime":"2024-12-05 09:28:13","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.7.0-1205-1733363917.tar","name":"openwrt-mt3000-4.7.0-1205-1733363917.tar","sha256":"e32c2e509d737b1b7057df45b1c379f89808595e1986a0e346c10f3a771230ee","size":57623240,"compile_time":1733362093,"last_modified_time":1733362093},{"compileTime":"2024-12-05 09:28:13","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.7.0-1205-1733363917.img","name":"openwrt-mt3000-4.7.0-1205-1733363917.img","sha256":"4410a2524e3dff7b7ac48c5eda1d2265df473469acf375bf417639756d5bd26c","size":60424192,"compile_time":1733362093,"last_modified_time":1733362093}]},{"model":"mt3000","version":"4.6.9","stage":"RELEASE","release_time":"2024-10-30 17:53:56","release_note":"<h1>V4.6.9</h1>\n<h2>Overview</h2>\n<p>This release mainly fixes a known bug.</p>\n<h2>Updated Model</h2>\n<p>Beryl AX (GL-MT3000)</p>\n<h2>Bug Fixe</h2>\n<ul>\n<li>Fixed the issue of abnormal transmit power in some cases.</li>\n</ul>\n","release_note_cn":"","partner":null,"download":[{"compileTime":"2024-10-30 17:53:56","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.6.9-1030-1730284273.tar","name":"openwrt-mt3000-4.6.9-1030-1730284273.tar","sha256":"a974ed53c0058cc068bc2908eef592192fe279e259511294ea5baecad2a65d5e","size":48231171,"compile_time":1730282036,"last_modified_time":1730282036},{"compileTime":"2024-10-30 17:53:56","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.6.9-1030-1730284273.img","name":"openwrt-mt3000-4.6.9-1030-1730284273.img","sha256":"17d8f45a9ae5bf8335632d5667a034d57de808d2a58bc162865d9c60274b4f03","size":50724864,"compile_time":1730282036,"last_modified_time":1730282036}]},{"model":"mt3000","version":"4.6.8","stage":"RELEASE","release_time":"2024-10-14 19:57:13","release_note":"<h1>V4.6.8</h1>\n<h2>Overview</h2>\n<p>This version mainly focuses on fixing a few known bugs.</p>\n<h2>Synchronized Updated Models</h2>\n<p>Flint (GL-AX1800), Slate AX (GL-AXT1800), Beryl AX (GL-MT3000), Brume 2 (GL-MT2500)/(GL-MT2500A), Flint 2 (GL-MT6000).</p>\n<h2>Improvement</h2>\n<ul>\n<li>Upgrade AdGuard Home version to v0.107.52.</li>\n</ul>\n<h2>Bug Fixes</h2>\n<ul>\n<li>Fixed the issue where, after enabling the VPN client and using Global Proxy, enabling AdGuard Home to handle client requests resulted in only localhots 127.0.0.1 appearing in the client list on the settings page.</li>\n<li>Fixed the issue that TCP port can be probed when WireGuard Server is enabled.</li>\n<li>Fixed the issue where the 5G wireless disappeared after the device relayed an upstream device with a 5G channel set to 20M dfs.</li>\n<li>Fixed the issue that resulted in unusual log messages.</li>\n<li>Fixed the issue where the router's own DNS requests always went through the dnsmasq proxy after switching DNS settings on the page.</li>\n</ul>\n","release_note_cn":"","partner":null,"download":[{"compileTime":"2024-10-14 19:57:13","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.6.8-1014-1728909330.tar","name":"openwrt-mt3000-4.6.8-1014-1728909330.tar","sha256":"ecb830e1b112b8910fca1aac17d9060d625b5d057d4037586f349abd5a33afd6","size":47894039,"compile_time":1728907033,"last_modified_time":1728907033},{"compileTime":"2024-10-14 19:57:13","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.6.8-1014-1728909330.img","name":"openwrt-mt3000-4.6.8-1014-1728909330.img","sha256":"5b2946a238032e6bfc5718ade3ee322fdd903225fc3f1426bec29a3b2181ee3f","size":50462720,"compile_time":1728907033,"last_modified_time":1728907033}]},{"model":"mt3000","version":"4.6.4","stage":"RELEASE","release_time":"2024-09-04 11:06:41","release_note":"<h1>V4.6.4</h1>\n<h2>Overview</h2>\n<p>This version mainly focuses on fixing a few known bugs and fixes some security vulnerabilities to enhance the user experience.</p>\n<h2>Supported Models</h2>\n<p>GL-AX1800, GL-AXT1800, GL-MT2500/GL-MT2500A, GL-MT3000, GL-MT6000.</p>\n<h2>Improvement</h2>\n<ul>\n<li>Updated WiFi driver(MT3000).</li>\n</ul>\n<h2>Bug Fixes</h2>\n<ul>\n<li>Fixed an issue with DNS leaks when upgrading from version 4.5.x reserved configurations to 4.6.x with VPN connected.</li>\n<li>Fixed the issue that when the 5G main network is not a DFS channel, the 5G main network page will be opened again with a prompt of about 3s for DFS channel availability detection.</li>\n<li>Fixed a relay scan timeout issue when the WiFi was configured with DFS channels.</li>\n<li>Fixed the issue where the relay icon did not turn gray when disconnecting the relay connection while the internet connection mode was set to relay and wired.</li>\n<li>Fixed the issue where language packs were not retained after upgrading with preserved configuration.</li>\n<li>Fixed the issue where PC WebDAV access would show no data, after enabling WebDAV, inserting a USB drive, and rebooting.</li>\n<li>Fixed the issue where RTTY-WEB remote access encountered relay scan errors and failed to relay.</li>\n<li>Fixed a crash of the device's WiFi driver when connecting with a D-Link DWA-192 AC1900 network adapter to 2.4G WiFi.</li>\n<li>Corrected an issue where adding and applying any custom rule in parental control had no effect on Google Chrome.</li>\n<li>Fixed an issue where trunks were configured with static IPs, and the trunks showed up as connected even though the trunks were disconnected.</li>\n<li>Fixed the issue of DNS leakage when VPN Client and DNS encryption are enabled.</li>\n<li>Corrected a problem where switching internet connection modes did not update the IP address in DDNS resolution.</li>\n<li>Fixed an issue where videos and images on the USB drive could not be accessed after inserting a USB drive, enabling DLNA, and soft resetting the device.</li>\n<li>Resolved a DNS leak issue when switching VPN policy from global proxy to IP/domain-based mode.</li>\n<li>Fixed the issue that the client's hostname was reported to the relay's superior after the relay set a random MAC.</li>\n<li>Fixed the issue that the WAN port does not show IPv6 address when connecting to a VPN client and then enabling IPv6.</li>\n<li>Addressed a program crash caused by relay scanning when no other APs were nearby.</li>\n<li>Corrected a crash caused by wireless scanning of SSIDs containing carriage return characters.</li>\n<li>Fixed the issue where accessing the device management page using an IPv6 address displayed incorrect MAC cloning information for Ethernet and relay.</li>\n<li>Fixed the issue where the WebDAV function did not work properly when using an account or password with a length of 64-bit characters.</li>\n<li>Fixed the issue that after pulling Mullvad VPN configuration, when the corresponding Public Key is deleted from the Mullvad website and the configuration is pulled again, the IP address in the pulled configuration changes to 'The'.</li>\n<li>Resolved the issue of relay scanning crashing when IBSS exists in the surrounding area.</li>\n<li>Fixed the issue where firewall rules would occasionally disappear after rebooting the device following a connection to wgclient.</li>\n<li>Fixed the issue where dip switch is bound to wireguard client, the device turns on ovpn client, and restarting the device causes vpn policy to fail.</li>\n<li>Fixed the issue where the killswitch failed to work when the DNS service was proxied by the AdGuard program or an encrypted DNS program, and the VPN was in a connected state.</li>\n</ul>\n","release_note_cn":"","partner":null,"download":[{"compileTime":"2024-09-04 11:06:41","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.6.4-0904-1725421504.tar","name":"openwrt-mt3000-4.6.4-0904-1725421504.tar","sha256":"e2946cade2d265f315035bfcadf675fad70c63476693df100740af6fde71c73a","size":47998979,"compile_time":1725419201,"last_modified_time":1725419201},{"compileTime":"2024-09-04 11:06:41","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.6.4-0904-1725421504.img","name":"openwrt-mt3000-4.6.4-0904-1725421504.img","sha256":"08d455125d9807db6fa4ca8176d697c010f6d6645b443c76f93d518a1998bcd1","size":50593792,"compile_time":1725419201,"last_modified_time":1725419201}]},{"model":"mt3000","version":"4.6.2","stage":"RELEASE","release_time":"2024-06-28 16:56:13","release_note":"<h1>V4.6.2</h1>\n<h2>Overview</h2>\n<p>This version mainly provides the following improvements:</p>\n<ul>\n<li>Improved the user experience with the repeater feature. Resolved an issue where most hotspots using Captive Portal could not be repeated.</li>\n<li>Improved the display of IPv6 addresses, and added support for customization of the interface language packs.</li>\n</ul>\n<h2>Supported models</h2>\n<p>Flint (GL-AX1800), Slate AX (GL-AXT1800), Beryl AX (GL-MT3000), Brume 2 (GL-MT2500)/(GL-MT2500A), Flint 2 (GL-MT6000).</p>\n<h2>New features</h2>\n<ul>\n<li>Added the Login Mode for Public Hotspots and the Camouflage Mode. This resolved an issue where most hotspots using Captive Portal could not be repeated.</li>\n<li>Added the option to use a randomized BSSID to prevent devices from being traced by BSSID.</li>\n<li>Added the UI language pack management feature. This allows adding additional language packs and subscribing to language pack updates.</li>\n<li>Added an option to choose whether the VPN interface uses manually configured DNS. This allows using the VPN's DNS servers, if Encrypted DNS or AdGuard Home is enabled.</li>\n<li>Added support for port range forwarding and port forwarding rule prioritization options.</li>\n<li>Added TTL, HL, and MTU options for each interface.</li>\n<li>Added support for connecting to Wi-Fi via QR code.</li>\n</ul>\n<h2>Improvements</h2>\n<ul>\n<li>Optimized the repeater feature to enhance performance and user experience. Added support for configuring MAC address for SSIDs individually.</li>\n<li>Optimized the display of IPv6 address on the Internet page and the Client page.</li>\n<li>Optimized the MAC address setting logic to support cloning or setting random MAC addresses for each interface.</li>\n<li>Optimized the status display on the Tethering interface to make a clear distinction between 'disabled' and 'enabled but no device'.</li>\n<li>Optimized the port forwarding feature. It now has its own page within the admin panel and  can function simultaneously as DMZ. The port opening (previously on the Firewall page) has been moved to the Security page.</li>\n<li>Optimized the logic of jumping after LAN IP is modified so that users do not need to sign in again.</li>\n<li>Optimized the logic of guest network enabling. If guest Wi-Fi is disabled, guest network will also be disabled.</li>\n<li>Optimized the logic of toggle switches. When rebooting a device, the enabling status of corresponding services (such as VPN) will be set according to the status of the toggle switch.</li>\n<li>Removed the length restriction on mobile phone number in SMS sending and forwarding.</li>\n<li>Removed the option 'Force 20MHz Bandwidth For 2.4G' from the Repeater settings.</li>\n<li>Upgraded AdGuard Home to version 0.107.46.</li>\n</ul>\n<h2>Bug fixes</h2>\n<ul>\n<li>Fixed an issue where reserved IP addresses were incorrectly sorted by IP if the IP address range was large.</li>\n<li>Fixed instances where abnormal issues would occur during firmware grade when “keep settings” was selected during IPv6 mode.</li>\n<li>Fixed an issue where the reset feature would not work when Tailscale was enabled.</li>\n<li>Fixed an issue where parental controls would not properly resolve domain names using capital letters (e.g., WWW.GOOGLE.COM).</li>\n<li>Fixed an issue where manually configured routes would not work in some cases when the VPN client was in custom routing proxy mode.</li>\n<li>Fixed an issue where the cellular interface would incorrectly determine the internet status of the IPv6 protocol.</li>\n<li>Fixed an issue where the manual DNS server address in the DNS interface would be invalid after disabling AdGuard Home.</li>\n<li>Fixed an issue where the imported WireGuard profiles with multi-line AllowedIPs entries were parsed incorrectly.</li>\n<li>Fixed an issue where re-uploading an OpenVPN profile ZIP file with an additional certificate file would not overwrite the old certificate file upload the first time. (This caused some configurations provided by the VPN service providers to not update properly when manually uploaded again.)</li>\n<li>Fixed an issue where the router would not recognize USB cellular modems using the M2 EM05G model.</li>\n<li>Fixed an issue that prevented the VPN from properly following the interface connection status for failover to function when using policy-based proxy mode.</li>\n</ul>\n","release_note_cn":"","partner":null,"download":[{"compileTime":"2024-06-28 16:56:13","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.6.2-0628-1719566865.tar","name":"openwrt-mt3000-4.6.2-0628-1719566865.tar","sha256":"8b3e636f7e4b58787fed25e61cb2d6b64ad3b8f8836b79d8cc79d36f8c775d93","size":47897178,"compile_time":1719564973,"last_modified_time":1719564973},{"compileTime":"2024-06-28 16:56:13","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.6.2-0628-1719566865.img","name":"openwrt-mt3000-4.6.2-0628-1719566865.img","sha256":"577000c83e7e8bd6ee230690efdd3da9c9c0afd451eebe28998a1d39b334742c","size":50462720,"compile_time":1719564973,"last_modified_time":1719564973}]},{"model":"mt3000","version":"4.5.16","stage":"RELEASE","release_time":"2024-03-30 13:17:15","release_note":"<h1>V4.5.16</h1>\n<h2>Overview</h2>\n<p>This release version mainly enhances network security and fixes known issues with network status detection, providing users with the option to manually add languages in the language community and the option to pre-emptively experience the new version. It is compatible with Full Cone NAT and SIP ALG features found in other routers.\nOptimization, bug fixing, and vulnerability repair for more vendors are shown below.</p>\n<h2>Supported Models</h2>\n<p>GL-A1300 Slate Plus, GL-AX1800 Flint, GL-AXT1800 Slate AX, GL-MT3000 Beryl AX, GL-MT2500/GL-MT2500A Brume 2, GL-X300B Collie</p>\n<h2>New features</h2>\n<ul>\n<li>Reconstructed mwan3 and renamed it as kmwan. Optimized failover and load balancing, as well as network status in various scenarios.</li>\n<li>Added the Security configuration page.</li>\n<li>Added grayscale testing design. Added RC version subscription and upgrade.</li>\n<li>Added the communityization of language packs to support manual addition.</li>\n<li>Added support for IPoE, and support for configuring VLAN ID during DHCP and static dialing.</li>\n<li>Added Full Cone NAT function.</li>\n<li>Added the SIP ALG option.</li>\n<li>Added new temperature protection setting for MTK Wi-Fi.</li>\n</ul>\n<h2>Improvements</h2>\n<ul>\n<li>Optimized the side route UI interaction and add the option to turn off the DHCP server itself.</li>\n<li>Optimized the restart process of the relay program.</li>\n<li>[Only for GL-X300B Collie] Optimized the functionality of RS485, the UI, and localization.</li>\n<li>Optimized the Tailscale mechanism.</li>\n<li>Updated language files and pull translation scripts.</li>\n</ul>\n<h2>Bug fixes</h2>\n<ul>\n<li>Fixed an issue where the interface jumped due to the incorrect change in the client's online time.</li>\n<li>Fixed an issue with the TTL settings not taking effect.</li>\n<li>Fixed an issue where scanning always indicated that it was in DFS when all interfaces were disabled.</li>\n<li>Fixed an issue of failing to enable Wi-Fi for the first time after upgrading.</li>\n<li>Fixed an issue of failing to connect to the AP due to a failure to parse IE_HT_CAP.</li>\n<li>Fixed an issue where multiple parsed AllowedIPs were incorrect when parsing the uploaded WireGuard client configuration files.</li>\n<li>Fixed an IP conflict issue that occured when adding a client profile to WireGuard after modifying the PeerIP of the WireGuard server configuration via SSH.</li>\n<li>Fixed an issue where inbound data from non-VPN interfaces would not trigger port forwarding rules when VPN was enabled.</li>\n<li>Fixed an issue where some devices from the TAP-S2S OpenVPN client would not display properly on the client page.</li>\n<li>Fixed an issue where the OpenVPN server certificate may be lost after rebooting the device.</li>\n<li>Fixed an issue where selecting manual mode on the MAC address page and entering the factory default MAC address on the ethernet page would result in an unsuccessful configuration even after connecting to the repeater successfully at first.</li>\n<li>Fixed an issue where the network speed limit feature was still activated after enabling network speed limit, enabling network acceleration, and rebooting the device.</li>\n<li>Fixed some known vulnerabilities.</li>\n</ul>\n","release_note_cn":"","partner":null,"download":[{"compileTime":"2024-03-30 13:17:15","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.5.16-0330-1711775976.tar","name":"openwrt-mt3000-4.5.16-0330-1711775976.tar","sha256":"cf2ceedb3f54f2963fb23f73712a21ef3f93a3a2f889ba66a7e9762b3839b8ee","size":49677871,"compile_time":1711775835,"last_modified_time":1711775835},{"compileTime":"2024-03-30 13:17:15","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.5.16-0330-1711775976.img","name":"openwrt-mt3000-4.5.16-0330-1711775976.img","sha256":"3dd071864f01dd0fb8000cf14c98df0905423c05405b2b811bcb177b8af75e8a","size":52428800,"compile_time":1711775835,"last_modified_time":1711775835}]},{"model":"mt3000","version":"4.5.0","stage":"RELEASE","release_time":"2024-01-23 18:08:58","release_note":"<h1>V4.5.0</h1>\n<h2>Overview</h2>\n<p>This release version mainly enhances network security and fixes known issues with network status detection, providing users with the option to manually add languages in the language community and the option to pre-emptively experience the new version. It is compatible with Full Cone NAT and SIP ALG features found in other routers.\nOptimization, bug fixing, and vulnerability repair for more vendors are shown below.</p>\n<p>This release is available for the following models:<br />\nGL-A1300 Slate Plus<br />\nGL-AX1800 Flint<br />\nGL-AXT1800 Slate AX<br />\nGL-MT3000 Beryl AX<br />\nGL-MT2500/GL-MT2500A Brume 2<br />\nGL-X300B Collie</p>\n<h2>New features</h2>\n<ul>\n<li>Reconstructed mwan3 and renamed it as kmwan. Optimized failover and load balancing, as well as network status in various scenarios.</li>\n<li>Added the Security configuration page.</li>\n<li>Added grayscale testing design. Added RC version subscription and upgrade.</li>\n<li>Added the communityization of language packs to support manual addition.</li>\n<li>Added support for IPoE, and support for configuring VLAN ID during DHCP and static dialing.</li>\n<li>Added Full Cone NAT function.</li>\n<li>Added the SIP ALG option.</li>\n<li>Added new temperature protection setting for MTK Wi-Fi.</li>\n</ul>\n<h2>Improvements</h2>\n<ul>\n<li>Optimized the side route UI interaction and add the option to turn off the DHCP server itself.</li>\n<li>Optimized the restart process of the relay program.</li>\n<li>[Only for GL-X300B Collie] Optimized the functionality of RS485, the UI, and localization.</li>\n<li>Optimized the Tailscale mechanism.</li>\n<li>Updated language files and pull translation scripts.</li>\n</ul>\n<h2>Bug fixes</h2>\n<ul>\n<li>Fixed an issue where the interface jumped due to the incorrect change in the client's online time.</li>\n<li>Fixed an issue with the TTL settings not taking effect.</li>\n<li>Fixed an issue where scanning always indicated that it was in DFS when all interfaces were disabled.</li>\n<li>Fixed an issue of failing to enable Wi-Fi for the first time after upgrading.</li>\n<li>Fixed an issue of failing to connect to the AP due to a failure to parse IE_HT_CAP.</li>\n</ul>\n<h2>Vulnerability fixes</h2>\n<ul>\n<li>Fixed a vulnerability that allowed arbitrary upload files to be created or modified through the API. (CVE-2023-47464)</li>\n<li>Fixed an unauthorized remote code inclusion vulnerability in the webDAV file server. (CVE-2023-47463)</li>\n<li>Fixed an issue of bypassing Nginx authentication through a Lua string pattern matching vulnerability. (CVE-2023-50919)</li>\n<li>Fixed an issue where users bypassed authentication or access control measures by assigning the same session ID each time they restarted. (CVE-2023-50920)</li>\n<li>Fixed an issue where calling the add_user interface in the system module could allow root access. (CVE-2023-50921)</li>\n<li>Fixed a vulnerability that allowed arbitrary shell commands to be executed through carefully crafted package names. (CVE-2023-46454)</li>\n<li>Fixed a path traversal vulnerability in the OpenVPN client file upload, which could lead to arbitrary file writes. (CVE-2023-46455, CVE-2023-46456)</li>\n<li>Fixed a vulnerability that allowed an attacker who stole the AdminToken cookie to upload a crontab-formatted file to a specific directory and wait for it to execute, thereby executing arbitrary code. (CVE-2023-50922)</li>\n<li>Fixed an injection vulnerability in the gl_system_log and gl_crash_log interface in the logread module, which allows arbitrary shell commands to be executed via JSON parameters. (CVE-2023-50445)</li>\n<li>Fixed an injection vulnerability in the upgrade_online interface of the upgrade module, which allowed arbitrary shell commands to be executed through JSON parameters. (CVE-2023-50445)</li>\n</ul>\n","release_note_cn":"","partner":null,"download":[{"compileTime":"2024-01-23 18:08:58","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.5.0-0123-1706004682.tar","name":"openwrt-mt3000-4.5.0-0123-1706004682.tar","sha256":"233f09c7adaf46a9d6748c40b8fc4f49f7793f5ffeb32e353b35a773c65060eb","size":48203946,"compile_time":1706004538,"last_modified_time":1706004538},{"compileTime":"2024-01-23 18:08:58","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.5.0-0123-1706004682.img","name":"openwrt-mt3000-4.5.0-0123-1706004682.img","sha256":"2d4ba076a9ba463a727898d05b14b2764ae0ea46e7e8984871debc1edfd48e67","size":50855936,"compile_time":1706004538,"last_modified_time":1706004538}]},{"model":"mt3000","version":"4.4.6","stage":"RELEASE","release_time":"2023-10-08 19:29:12","release_note":"<h1>V4.4.6 - Oct 8,2023</h1>\n<h2>VPN</h2>\n<ul>\n<li>Fixed the problem that the OpenVPN client cannot access the Internet after dialing up, either by rebooting the router or by restarting the feature.</li>\n</ul>\n<h2>WireGuard</h2>\n<ul>\n<li>Fixed the problem that WireGuard client gets error 'Error: inet6 prefix is expected rather than' when connecting to server.</li>\n<li>Fixed the problem that the WireGuard client of the device under test does not disconnect after the WireGuard server of the device accompanying the test is shut down, and keeps showing the connection status.</li>\n</ul>\n<h2>Repeater</h2>\n<ul>\n<li>Fixed the problem that the wireless network connection is abnormal after the router repeater DFS channel.</li>\n</ul>\n<h2>Tailscale</h2>\n<ul>\n<li>Fixed the problem that when using PPPoE dialup, the Internet cannot be accessed when tailscale is enabled.</li>\n<li>Fixed the problem that the Good Cloud platform fails to connect when Tailscale is enabled.</li>\n</ul>\n<h2>Clients</h2>\n<ul>\n<li>Fixed the problem that the black/white list function is not compatible with the old version of blacklist.</li>\n</ul>\n<h2>Upgrade</h2>\n<ul>\n<li>Fixed the problem that online upgrade reports error '-4,fetch firmware name fail: network unreachable'.</li>\n</ul>\n<h2>DDNS</h2>\n<ul>\n<li>Fixed the problem that all TCP ports are opened when DDNS is enabled to allow http/https access in reserved configurations.</li>\n</ul>\n<h2>LAN</h2>\n<ul>\n<li>Fixed the problem that br-lan occasionally hangs when changing LAN IP.</li>\n</ul>\n<h2>Ethernet</h2>\n<ul>\n<li>Fixed the problem that Wan interface do not work.</li>\n</ul>\n","release_note_cn":"","partner":null,"download":[{"compileTime":"2023-10-08 19:29:12","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.4.6-1008-1696764709.tar","name":"openwrt-mt3000-4.4.6-1008-1696764709.tar","sha256":"271457630e8d3ef51c49acfec410715802405cb85491616c94a561a7eb0d9a4e","size":60899261,"compile_time":1696764552,"last_modified_time":1696764552},{"compileTime":"2023-10-08 19:29:12","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.4.6-1008-1696764709.img","name":"openwrt-mt3000-4.4.6-1008-1696764709.img","sha256":"f8fc92d5cef5225c9b882e27586726f2a52769c8a99e2c74d4a01c8dd9a10415","size":63832064,"compile_time":1696764552,"last_modified_time":1696764552}]},{"model":"mt3000","version":"4.4.5","stage":"RELEASE","release_time":"2023-08-11 19:49:43","release_note":"<h1>V4.4.5 - Aug 11,2023</h1>\n<h2>VPN</h2>\n<ul>\n<li>Open VPN server when using tor,delete -4VPN conflict prompt.</li>\n</ul>\n<h2>GoodCloud</h2>\n<ul>\n<li>Fix MQTT runs abnormally after obtaining 4G/5G information.</li>\n</ul>\n<h2>Modem</h2>\n<ul>\n<li>Fix M2 demo board cannot recognize SIM card.</li>\n<li>Fix abnormal display of LTE bandwidth.</li>\n</ul>\n<h2>Tailscale</h2>\n<ul>\n<li>Add support for accepting routes option.</li>\n<li>Add support for mutual access between Tailscale subnets.</li>\n</ul>\n<h2>Dns</h2>\n<ul>\n<li>Fix next-dns setting does not take effect.</li>\n</ul>\n<h2>WireGuard</h2>\n<ul>\n<li>Fix WireGuard cannot reconnect after working for two days.</li>\n</ul>\n<h2>Parental Control</h2>\n<ul>\n<li>Fix adding specified url does not take effect.</li>\n</ul>\n","release_note_cn":"","partner":null,"download":[{"compileTime":"2023-08-11 19:49:43","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.4.5-0811-1691754744.tar","name":"openwrt-mt3000-4.4.5-0811-1691754744.tar","sha256":"95d367bf6ade595c63676e1b9818ea7df929ad466a1e8f7c8461bc907e89febc","size":60888427,"compile_time":1691754583,"last_modified_time":1691754583},{"compileTime":"2023-08-11 19:49:43","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.4.5-0811-1691754744.img","name":"openwrt-mt3000-4.4.5-0811-1691754744.img","sha256":"c4065f991a74fea9a681a9431f6fb70ff115dc1d52513e1506e6bf89242b3beb","size":63832064,"compile_time":1691754583,"last_modified_time":1691754583}]},{"model":"mt3000","version":"4.2.3","stage":"RELEASE","release_time":"2023-07-06 13:50:24","release_note":"<h2>Bug Fixes</h2>\n<p>Fixed the problem that after the MT3000 relays the 160M Hz hotspot, the AP becomes 20M.<br>\nFixed the problem that the AX/AXT1800 cannot access the AP itself after relaying the DFS 140 channel.<br>\nFixed the problem that parental control cannot block blacklist websites in newer browsers.<br>\nFixed the externder working mode, the superior cannot ping the subordinate.<br>\nFixed the problem that openvpn port forwarding fails after the reserved configuration is upgraded.<br>\nFix the problem that mqtt cannot report SSID.<br>\nFixed the problem that ddns occasional interface return error.<br>\nFixed The relay cannot connect to Huawei TC7102 160MHz 5GWiFi.<br>\nFix single sim card slot does not return dual sim card slot information.<br>\nFixed the problem that after the adguardhome function is turned on on the A1300 and the adguardhome is turned off, the visitor has no network.<br>\nFixed the problem that Openvpn Server and wireguard Server shut down remote access to the LAN subnet, but the Openvpn and wireguard clients can still access the IP address of the PC on the LAN side of the server.<br>\nFixed the AP bridge mode, the bridge is not successful. The address assigned by the superior cannot be obtained.<br>\nSupport-EM160R-EM060K-EM120K-RM520N-modem.<br>\nFixed the problem that A1300 cannot recognize USB3.0 external modem.<br>\nFixed the problem of abnormal equipment caused by the time zone or 160M bandwidth issued by the GoodCloud.<br>\nCorrect the display problem of the LED light in the unconnected network mode.<br>\nFixed the problem of unsuccessful dialing using external modem, QMI and QCM protocol dialing.<br>\nRoll back MTK SDK from v7.6.7.0 to v7.6.6.1.<br></p>\n","release_note_cn":"","partner":null,"download":[{"compileTime":"2023-07-06 13:50:24","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.2.3-0706-1688622794.tar","name":"openwrt-mt3000-4.2.3-0706-1688622794.tar","sha256":"f5fc45d4196fd088307a3e4a92dd6e5521a0e087556934bc0a3ead23121c3372","size":60889328,"compile_time":1688622624,"last_modified_time":1688622624},{"compileTime":"2023-07-06 13:50:24","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.2.3-0706-1688622794.img","name":"openwrt-mt3000-4.2.3-0706-1688622794.img","sha256":"e6c9f3d7b45f32554ea71787a47e6d38836622f854ba2d59f88a4b5e1e21803a","size":63832064,"compile_time":1688622624,"last_modified_time":1688622624}]},{"model":"mt3000","version":"4.2.2","stage":"RELEASE","release_time":"2023-04-14 20:19:47","release_note":"<h2>Bug Fixes</h2>\n<p>Fixed the problem where the openvpn cannot resolve DNS after restarting openvpn after keeping settings upgrade.<br>\nFixed the problem where the status cannot be displayed correctly when the external modem is connected using the 3G protocol.<br>\nFixed a BUG where clients could not access the internet after failover.<br>\nFixed some UI display exceptions.<br></p>\n<h2>Software Upgrade</h2>\n<p>Upgraded MTK SDK from v7.6.6.1 to v7.6.7.0<br></p>\n","release_note_cn":"","partner":null,"download":[{"compileTime":"2023-04-14 20:19:47","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.2.2-0414-1681474958.tar","name":"openwrt-mt3000-4.2.2-0414-1681474958.tar","sha256":"4116bdf44ecf6092b36cac56a87145602fa5bd3da2be99d297c9e55615ef00be","size":60908536,"compile_time":1681474787,"last_modified_time":1681474787},{"compileTime":"2023-04-14 20:19:47","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.2.2-0414-1681474958.img","name":"openwrt-mt3000-4.2.2-0414-1681474958.img","sha256":"c19c52712f97dc2d0968ac8348ef27a00f6506b9f073a25ac0e8446574bf5a27","size":63832064,"compile_time":1681474787,"last_modified_time":1681474787}]},{"model":"mt3000","version":"4.2.1","stage":"RELEASE","release_time":"2023-03-25 09:53:05","release_note":"<h2>Bug Fixes</h2>\n<p>Fixed a problem where the WiFi configuration page showed unavailable channel options.<br>\nFixed a problem where NordVPN could not resolve DNS after keeping settings upgrade.<br>\nFixed a problem where GL-MT3000 failed to recognize USB3.0 modem.<br>\nFixed a problem where the IPV6 rate limiting does not take effect.<br>\nFixed a problem where GL-MT3000 failed to repeat to iPhone 13 and TP-LINK ACR700.<br>\nFixed a memory leak problem in GL-MT3000 when using QCM protocol.<br>\nFixed a probabilistic issue where GL-MT3000 could not apply OpenVPN username and password.<br></p>\n<h2>Optimizations</h2>\n<p>Disabled nginx access logs.<br>\nOptimized the MWAN3 online detection threshold.<br>\nOptimized the synchronization of configuration files in abnormal situations.<br>\nOptimized the repeater scan time of GL-MT3000.<br></p>\n<h2>Software Upgrade</h2>\n<p>Upgraded AdguardHome to V0.107.26.<br></p>\n","release_note_cn":"","partner":null,"download":[{"compileTime":"2023-03-25 09:53:05","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.2.1-0325-1679709325.tar","name":"openwrt-mt3000-4.2.1-0325-1679709325.tar","sha256":"33bd89f20d5f6bdbe8a4507184c32f47e0aa458b9f58ca58bccdee97a676c420","size":60867979,"compile_time":1679709185,"last_modified_time":1679709185},{"compileTime":"2023-03-25 09:53:05","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.2.1-0325-1679709325.img","name":"openwrt-mt3000-4.2.1-0325-1679709325.img","sha256":"c70b283cd90355d7846e7389c00093f621034f66fa38840f76b1602347988077","size":63832064,"compile_time":1679709185,"last_modified_time":1679709185}]},{"model":"mt3000","version":"4.2.0","stage":"RELEASE","release_time":"2023-02-23 17:04:11","release_note":"<h2>Language</h2>\n<p>Added German language.<br></p>\n<h2>New feature</h2>\n<p>Added Parental Control feature.<br>\nAdded Zerotier feature.<br>\nAdded Tailscale feature.<br>\nAdded Clear Traffic Statistics button for in client page.<br>\nAdded DHCP Gateway option for LAN.<br>\nAdded SSID Visibility option for guest Wi-Fi.<br>\nAdded support for GoodCloud alerts when new clients join.<br>\nAdded support for comments for domain and IP profiles in VPN policy.<br></p>\n<h2>Optimization</h2>\n<p>Improved IPv6 LAN Mode options. Separates the native and passthrough modes.<br>\nImproved the results and hints of the DDNS test.<br>\nImproved drop-in gateway feature with DHCP-based solution to increase stability.<br>\nImproved LED lighting logic to ensure consistency with the UI.<br>\nImproved interaction for MAC address cloning.<br>\nImproved networking status alerts in Internet page.<br>\nImproved interface tracking settings description for Multi-WAN.<br>\nImproved login page with automatic focus to password input box.<br>\nImproved VPN client configuration file view with files sorted by name.<br>\nImproved the switch name in the VPN global options for whether the GL.iNet service uses VPN or not.<br>\nImproved the interaction of set read-only users to read-write users in network storage.<br>\nImproved ADGuard Home feature to support seeing which client the request is coming from.<br></p>\n","release_note_cn":"","partner":null,"download":[{"compileTime":"2023-02-23 17:04:11","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.2.0-0223-1677143187.tar","name":"openwrt-mt3000-4.2.0-0223-1677143187.tar","sha256":"62e47c1fb29e6ae7db42199f2a1e56f43eb5b6b5685bf8d9bf7f371a2596a80d","size":62302034,"compile_time":1677143051,"last_modified_time":1677143051},{"compileTime":"2023-02-23 17:04:11","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.2.0-0223-1677143187.img","name":"openwrt-mt3000-4.2.0-0223-1677143187.img","sha256":"4079ad578f13be56d24a2321ba682390246445b5532a51d84feef35c118fde73","size":65273856,"compile_time":1677143051,"last_modified_time":1677143051}]},{"model":"mt3000","version":"4.1.3","stage":"RELEASE","release_time":"2023-01-12 18:51:32","release_note":"<h2>Modem</h2>\n<p>Fix EG25/EC25/EC20 modems qmi dial-up failure<br></p>\n<h2>Repeater</h2>\n<p>Fix the problem of low speed<br>\nFix scan disconnection issue<br></p>\n<h2>Wifi</h2>\n<p>Fix the problem that some channels of wifi in Germany are not displayed<br></p>\n","release_note_cn":"","partner":null,"download":[{"compileTime":"2023-01-12 18:51:32","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.1.3-0112-1673519726.tar","name":"openwrt-mt3000-4.1.3-0112-1673519726.tar","sha256":"9dada4947fcaf640b4ffde775019d929d2bb5c6d31e77138c463827d493e6492","size":52869907,"compile_time":1673520692,"last_modified_time":1673520692},{"compileTime":"2023-01-12 18:51:32","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.1.3-0112-1673519726.img","name":"openwrt-mt3000-4.1.3-0112-1673519726.img","sha256":"e02941ab13d00269a7861230bd02c11b7c80b08260172e0799476d8474bbace0","size":55574528,"compile_time":1673520692,"last_modified_time":1673520692}]},{"model":"mt3000","version":"4.1.2","stage":"RELEASE","release_time":"2022-12-05 16:17:50","release_note":"<h2>Internet</h2>\n<p>Add support for EM160R/EM060k/EM120K/RM520N/E3372/E3276/QD91F modems<br></p>\n<h2>Network</h2>\n<p>Fix portal page jump before setup device<br></p>\n<h2>Repeater</h2>\n<p>Fix deleting saved Wi-Fis will cause crash<br>\nFix for repeating Wi-Fi with WPA2 EAP will fail<br>\nFix the Wi-Fi events could not be monitored on reboot<br>\nFix repeating first connection after reboot will prompt password error<br></p>\n<h2>VPN</h2>\n<p>Add VPN Cascading feature<br></p>\n","release_note_cn":"","partner":null,"download":[{"compileTime":"2022-12-05 16:17:50","link":"https://fw.gl-inet.com/firmware/mt3000/release/openwrt-mt3000-4.1.2-1205-1670228220.bin","name":"openwrt-mt3000-4.1.2-1205-1670228220.bin","sha256":"48731a8e819d68cba9042fe2b4418a2f39c4f2c4b78ec3955741d8d867ad697e","size":53443548,"compile_time":1670228270,"last_modified_time":1670228270}]}],"msg":""}